DIY SPLIT RAIL FENCE GATE HOW TO
DIY SPLIT RAIL FENCE GATE FREE

Once that line is completed, go back and adjust each post to ensure the fence is following the grade and has a nice smooth flow to it.

If the concrete is really wet and the post wants to dip down further, place a 2” block under the fence to keep it at the proper height. Fill the remaining 2″ with packed dirt and press tightly. In filling the hole with concrete, leave it 2” short of the top of the hole. The post should always be in line with your string line. Plumb the post (using a level to ensure it’s perfectly straight up on two adjacent sides). Repeat this for the number of rails your fence panel has. Then use a 1” self tapping screw to screw into the side of the post through the rail inside to secure the fence panel to the post.

Attach one section of fence to the post by sliding the notched rails of the panel into the holes of the post.

Using the post hole digger, dig your holes 6″ wide, 24” – 42” deep, depending on the frost line in your part of the country.

Make sure all holes line up with the string line. Add 1/4″ to gate opening width… 3′ wide gate should be 36 1/4″ from inside of post to inside of post. Gate posts widths are measured from the inside of the post to the inside of the other gate post. Mark holes on center at 72 1/2” (refer to our Materials List Help for information on lines of fence NOT divisible by 6′).

Mark the location of the holes, as indicated by the ‘layout guide’ that is provided with every order.

Hitting a line could cost more than you’d like. These are usually found on your plot plan.

Before digging any holes, make sure to find and mark for utilities, drainage and sewer lines.

The string will be your straight line guide as to where the holes will be dug.

Layout your entire fence by indicating the end posts, corner posts and gate posts locations with the wooden stakes and then connecting together with the string.

To successfully complete your fence installation project, you will need the following tools: String Line, Wooden stakes for each Corner, End and Gate Post location, Post Hole Digger, Concrete, Phillips Screw Driver. Industrial, Commercial, & Residential Fencing Differences Installing your Fence We also added a tools list and material list so that you can start and finish your fence installation project without missing anything.ĭo not hesitate to contact us for assistance or more details.Ĭlick on a link below to navigate to the particular section.

DIY SPLIT RAIL FENCE GATE HOW TO

Our guide is complete and includes information on how to install your fence and gates. Above all, when installed correctly they look great and enhance the style of your property.īefore getting your hands dirty, read our DIY installation guide from start to end to get an idea of the work involved.

DIY SPLIT RAIL FENCE GATE FREE

They are durable, easy to install, maintenance free and an affordable fencing solution for every property. People like aluminum fences for a number of reasons.

Top 7 Things to AVOID when installing your own aluminum fence.Top 5 Things to consider BEFORE purchasing an aluminum fence.Pool Fencing Guide: The Ultimate DIY Performance.

Appalachian & Manhattan Aluminum Fencing.

Diy split rail fence gate